Remodeling 101: How to Revive Stained Concrete Floors, Color Edition
Meredith Swinehart October 2, 2020
I’ve long loved concrete floors. I like their zero-maintenance appeal, their industrial look that gets better with time, and—though they work well with radiant underfloor heating (see our Remodeling 101 on the topic)—I even like the feeling of a cool floor underfoot, especially when temperatures rise.
But I’ve recently found a flaw in concrete floors—something that had never occurred to me until I attempted to remediate the situation: If your concrete floors are stained, their color is quite literally “set.” In my apartment, that’s an inconsistently applied, dusty red. If you want to change it, you’ll need to put in either major money or elbow grease.
To wade through the options, I talked to Anthony Zamora of C Rock Finishing in Oakland, California—here’s what I learned.
Above: San Francisco interior designer Nicole Hollis had new concrete floors poured in her 5,000-square-foot studio. For the rest of the space, see A Noirish Studio for a San Francisco Design Star . Photograph by Laure Joliet , courtesy of Nicole Hollis.
How easy is it to change the color of stained concrete floors?
Not very. “Concrete is like a big rock sponge,” Zamora says. “Before it has anything on it, it wants to soak up everything.” Meaning that whatever has already been applied to your concrete floors has fundamentally changed the material and will affect coloration going forward. This is a generalization, of course—but when floors are “stained,” or more accurately, treated with a penetrating sealant, the color has been absorbed to an unknown depth.
To change the color, we’re covering the two most common solutions here: You can re-stain the floors (by applying a new penetrating sealant) or paint them (by applying an industrial coating). Other options include staining and then polishing your floors (which achieves a different effect than just re-staining) or covering them entirely with a new material, like a microtopping or concrete overlay.
Above: In an early iteration of the office of SF-based fashion retailer Everlane (see their new space here ), the existing concrete floors were re-covered with a new cement layer, a process called microtopping. For more, see Office Visit: The Everlane Studio in San Francisco . Photograph by June Kim, courtesy of Everlane.
How can I re-stain my concrete floors?
To start, you’ll need to have the existing surface mechanically ground down, both to prime the concrete to accept a new stain and to remove as much of the offending color as possible. “You can’t control how much stain permeated the concrete in the original process,” Zamora says.It could be superficial and come off fairly quickly, or it could have permeated as deeply as half an inch down, which means it’s not going anywhere. You’ll need to mechanically grind your floors to determine your next step.
Above: When Seattle chef Matt Dillon remodeled a bathroom at his farm on Vashon Island, Washington, its concrete floor was preexisting but needed to be demoed when plumbing was added. Dillon and his contractor patched the floor and polished it with acid etching. See more in Bathroom of the Week: A Vintage Bath on Old Chaser Farm on Vashon Island, Washington . Photograph by Aaron Leitz for Remodelista.
What does it mean to mechanically grind the concrete?
You need to use something harder than concrete in order to grind it down, explains Zamora, which usually means a substrate like metal, ceramic, or resin that’s been impregnated with diamonds. “Diamonds are so strong that they can actually cut up the surface of the concrete.”
Can I mechanically grind the floor myself?
If you’re imagining going over your floor with an electric hand sander (like I did), don’t: “It’s a messy process,” said Zamora, “and the dust is dangerous. If someone is going to do this themselves, they must do a ton of research first and follow best practices to stay safe.” To start, you’ll need to rent a mechanical grinder plus a large HEPA vacuum to filter the toxic particulates out of the air. These rentals will run you about $1,500 together, Zamora estimates. You’ll also want to be sure the particulates stay away from anything you’ll be living with—so all belongings and furniture must be securely covered, or, ideally, removed before work begins. (It’s obvious, but there’s no harm in stating it: People and pets should stay far away.)
Above: When designers Rachel Gant and Andrew Deming of Yield Design bought a house in St. Augustine, Florida, they were on a tight budget, so they removed the old flooring themselves and even restained and sealed the concrete. They did, however, hire a professional to grind the floors and apply a “skim coat” layer of concrete to even out the foundation. “I’m glad we didn’t attempt those steps ourselves,” said Deming. “We’re all for DIY, but we were new to this process, and we thought that part of the work would be the most difficult.” See more in Before & After: A Design Duo’s Whole-House Overhaul for $15,000 . Photograph by Kelsey Heinze, courtesy of Yield Design.
The concrete has been mechanically ground. Now can I stain my floors a new color?
Sort of. “The stains will interact the way they will,” said Zamora. “You cannot control it.” Meaning, you’ll always see remnants of what came before. If the floor was unintentionally stained early in its life—like the bucket ring the contractor left while staining my floors red—that mark will never go away (a feature insiders call “ghosting”). Color-wise, your best bet is to stain the floor a darker color—for instance, very dark gray or black—and you’ll achieve 80 to 90 percent coverage in the best-case scenario. In my case, Zamora says, the floor “will always have an echo of red in it,” no matter how dark a stain I choose.
Above: When designing an office for a NYC startup on a tight budget, designer Brad Sherman made the existing stained concrete floors work (the floors that have drawn my ire of late actually look something like this). For more, see Kitchen of the Week: The Stylishly Economical Kitchen, Chipboard Edition . Photograph by James Ransom courtesy of B. Sherman Workshop.
Staining won’t work for me. What if I want a uniform look?
If you want a uniform look, consider coating your concrete floors with an industrial solution like epoxy or polyurethane.
Can’t I just paint over it myself?
Zamora points to the garage and concrete floor coatings sold at home improvement stores and says they can be applied at home with mixed results, but emphasizes that these are not the same solutions that a concrete professional would use. “If you have a small closet or laundry room to cover, these should work fine,” he said. “If you’re talking about your living room, where you want a nice finish and one that will hold up over time, avoid the DIY painting route.”
Joan Barton of Dirty Girl Construction in LA gave us the following advice: “Refinishing concrete to a perfect, polished showroom type of floor is very time-consuming, but less expensive than epoxy and something that a DIY-er who has the time and energy can achieve if they follow the right steps,” she said. She’s had artist friends paint their floors with good results; she reports that another perfectionist friend said, “‘Oh my god, never again!’—and that’s from a designer who likes to DIY as much as possible.”
Note: We’ve heard of folks painting over their concrete floors with standard wall paints, but this is not recommended. “You’ll be peeling paint chips off your shoes and chair legs and you’ll be constantly touching up the paint,” Barton says. “If you’re going for something rustic, that could be OK—except the paint chips on shoes part.”
Above: Barton used white marine paint for a glossy floor finish in this Culver City showroom. She had some parts ground down and left others as she found them, because “we wanted a few of the original characteristics to telegraph through,” she said. “If you want a smoother, more consistent finish, then you grind the entire slab.” For more advice from Barton, read Expert Advice: 4 Affordable Floor Finishes from Dirty Girl Construction .
How much would it cost to have my floors redone professionally?
Zamora laid out a few rules to keep in mind when considering the pricing of concrete floor refinishing.
First, “everything we do is based on economies of scale,” he said. “The larger the project, the lower the price per square foot.” Zamora estimates that for a 2,500-square-foot space or larger, concrete refinishing is about equal in price to having tile or carpet installed. But for a space any smaller, the cost per square foot might be between 50 and 200 percent more expensive.
Second, pricing is dependent on the space. One large rectangle will be much more affordable to refinish than five rooms that add up to the same square footage. The more edges, corners, closets, etc., the higher the cost.
Above: When bloggers Nora Eisermann and Laura Muthesius moved into an 1880s flat in a farm village outside of Berlin, they loved its concrete floor, “but it was red—so we decided to paint it gray,” they told us. See more in Kitchen of the Week: A DIY Ikea Country Kitchen for Two Berlin Creatives . Photograph by Laura Muthesius , courtesy of Our Food Stories.
How much would it cost to have a penetrating sealant re-applied?
It depends on the look you’re after, but a basic, high-quality finish on a 1,000-square-foot space would cost between $6,500 and $12,000 in the San Francisco Bay Area, Zamora estimates. “Los Angeles would be a little bit cheaper,” he says, as would most other locales in the US. (You’ll need to solicit quotes in your own area, but if you don’t live in San Francisco, at least now you’ll avoid sticker shock.)
Remember, Zamora says: In both cases, a 200-square-foot room is not going to be 80 percent cheaper just because it’s 80 percent smaller. Minimums do apply for concrete refinishing.
How much would it cost to have an industrial coating professionally applied?
A basic finish on a 1,000-square-foot space would cost between $8,000 and $15,000 in the Bay Area, Zamora says.
One note: If you’re only looking to refinish a garage floor, there are cheaper options than what’s outlined here. Zamora estimates that a refinishing business in the Bay Area might charge as little as $1,800 to cover a 400-square-foot garage with an industrial coating (the kind meant for garages, with small flakes inside for traction—not something you’d want in your living room).
Above: At Kin Kao restaurant in Vancouver, architects Scott & Scott installed a new concrete floor tinted with bright blue commercial paint. See the rest in Paint It Blue: A New Wave Thai Restaurant in Vancouver . Photograph by Scott & Scott.
Can I hire a pro to grind the floors and I’ll do the staining or coating myself?
“This is a great question,” said Zamora, “because people often misunderstand the pricing.” The surface prep, including grinding, is the bulk of the cost with concrete refinishing. “Say I quoted $6,000 to restain a floor,” he said. “If you only want me to do the prep work, it would still cost you $5,000.”
Above: At NYC bistro Mimi, the owners covered a concrete slab in red boat paint, which “alerts visitors to the step up” and creates the feeling of a separate space. See more in French Glam on a Budget: 15 Ideas to Steal from Mimi, New York’s Sexiest Bistro . Photograph by Alison Engstrom for Remodelista.
“If you have the budget, hire skilled installers,” Zamora says; your stain or coating can last between 15 and 20 years with proper maintenance. “If you don’t have the budget, and you’re going to DIY, do everything you can to follow best practices from beginning to end, so you don’t have to relive the process again later.”
After all I’ve learned, I’d have an epoxy coating professionally applied if I had the budget. But I’m dealing with the spotty red floors for now, and researching hardwood.
Above: After just two years of use at Toki Cafe in Amsterdam, the dark blue floor paint shows signs of wear. See more in Toki: An Effortlessly Cool Cafe in Amsterdam, Terrazzo Included . Photograph courtesy of Toki.
Only one day left! Don’t forget to enter our contest by submitting up to 10 photos of your project by this Friday, June 22. There are separate contest categories for professional and amateur designers on both Remodelista and Gardenista , and winners get a $500 gift card to shop Schoolhouse .
For more solutions with paint, see: